Invacare Hospital Bed Parts

Invacare is a globally recognized manufacturer of healthcare equipment, including hospital beds and other related products. Their equipment is used in hospitals, care homes, and private residences, where patient safety, reliability, and comfort are a priority. 

Over time, parts of hospital beds gradually deteriorate and require replacement or upgrade. Any upgrade or replacement makes the hospital environment cleaner and safer for the patient. Many components are available on the market that can be used to upgrade Invacare hospital beds, making them more effective, practical, and comfortable. 

What Are Invacare Hospital Bed Parts?

Invacare hospital bed parts comprise the components and accessories that make up the bed, supporting its functionality. They include all mechanical, electrical, structural, and comfort-related parts.

Mechanical parts include:

• Motor actuators: assist in lifting, lowering, tilting, or profiling different bed components

• Bed-rail systems: rail, sliders, locks

• Casters and brakes: wheels that provide movement and secure positioning

• Hand controls: pendants

• Control boxes and cable

• Bed ends or panels

• Bed bases and frames

• Accessory attachment parts.

Additional parts include pressure relief/comfort accessories, such as mattresses or overlays, as well as heel protectors. Some of these upgrades are necessary to the bed's safety, while others are designed for comfort or convenience.

How Difficult Are They to Replace?

Invacare bed parts are relatively easy to change, add, or replace with the proper know-how and expertise. Ultimately, it depends on the component in question. 

Some minor parts, such as sliders for bed rails, casters, or non‑electrical bed ends/panels, are usually direct replacements and can be readily swapped out with simple tools by someone with minimal mechanical aptitude. For example, the “Bed Rail Slider Assembly” is a direct replacement part for Invacare profiling beds. This component can crack over time due to regular wear, but it can be easily replaced without requiring major disassembly.

Other parts are more complex. Electrical actuators control the height or tilt of the bed. Because their installation requires unwiring and rewiring cables, you need access and specialized knowledge of control boxes, as well as safety safeguards (such as powering off and connecting the correct wiring).

Hand control pendants must be compatible with the model and voltage to function flawlessly and safely. If the frame of the structure is damaged, replacement can require more technical skills and partial or full removal of the bed. 

Remember that there are hygiene, legislative, and safety requirements (e.g., for side rails and locking devices) that can make some replacements more challenging. In a care facility, a trained technician or service engineer typically performs these replacements, especially for safety, weight capacity, or electrical components that may be affected.

Different Types of Invacare Bed Parts

Let’s examine the different types of Invacare bed parts. For each category, we propose an example. For a complete list of the products we offer, please visit our ShopHomeMed shop.

Structural / Frame Components

Structural and frame components are key parts that constitute the physical framework of the bed. These include the bed frame, bed ends or panels (such as the footboard and headboard), bed base slats or platform, and side rails equipped with slide or locking systems. Examples include Invacare Universal Bed Ends and Invacare Assist Bed Rails. 

Moving Parts / Mechanical

These parts include actuators (bed section-moving motors), hinges, joint or crank mechanisms, and components that allow the bed to reshape or move up and down. They also include casters (wheels) with brakes, leg and link sets. For instance, check the "Invacare 3‑inch casters with brake" and the “Invacare Patient Lift Actuator”. 

Control / Electrical Components

These parts provide the interface and power necessary to operate and adjust the bed’s movements. Their role is to assist users or caregivers in setting up the bed. They include hand control pendants (like the Invacare Hand Control Pendant for CS3/CS5 beds), control boxes, wiring harnesses or cables, or electronic locking systems. As such, any repair person replacing these parts must be familiar with matching connectors and electrical safety precautions. 

Accessory / Safety Parts

Other accessory and safety parts include side rails, rail slider kits, safety rail attachment points, bed-rail locks, mattress retainers, and safety products designed to improve patient transfer safety. They may not alter the shape or movement of the bed, but they do prevent accidents and falls.

Comfort / Pressure Relief and Patient Care

Although technically "bed part" might exclude the mattress in some cases, the majority of suppliers treat mattress overlays or pressure relief systems as integral to the bed function. Mattress and their accessories are used to prevent pressure ulcers, and they improve patient comfort. They usually include mattress overlays, heel boots, bed cradles, and other similar products. Invacare also sells beds with very low profiling height to reduce the risk of falls.

Uses of Invacare Bed Parts

Spare Invacare bed parts are used to maintain, repair, upgrade, or alter Invacare hospital beds to the required specifications and needs.  

As hospital beds are used daily, some parts will inevitably need to be replaced, including end panels or frame parts to maintain the bed's integrity, as well as side assist rails for maximum patient safety. 

Mechanical parts break down over time due to years of use and wear and tear. The timely replacement of old actuators or brakes assures that the bed height changes and tilts properly, and that the head/foot sections operate safely and smoothly, both for patient comfort and for the caregiver and any necessary activities (e.g., transfers, hygiene). 

In addition to mechanical parts, electrical and control systems also require adequate maintenance. They are key components, as they enable the bed to respond to commands. Safety interlocks guarantee that the side rails remain securely raised and prevent the bed from moving unintentionally. Other safety components, such as slider kits and side rails, prevent accidental falls or entrapment.

Comfort elements, such as pressure-relieving mattresses, help prevent pressure sores and support the skin while encouraging circulation, and they need to be replaced periodically.

All care homes and hospitals must maintain their hospital beds to meet safety regulations, reduce downtime (due to beds being out of action), and minimize the risk of injury to staff and patients. Good maintenance and servicing extend the life of the bed and your initial investment. Always purchase authentic replacement parts that are compatible, safe, and come with a warranty. 

____________________________________________________________________________

Shop Home Med is an online retailer that specializes in health and wellness products. On our site, you can find a wide range of products, including hospital beds, mattresses, wheelchairs, patient lifts, and bathroom safety aids. 

We accept Flexible Spending Accounts (FSA) and Health Savings Accounts (HSA) for eligible products, letting you use pre-tax funds for purchases. We have partnered with SIKA Health to offer you secure and efficient transactions. We also offer a "Buy Now, Pay Later" option through Shop Pay, which allows you to purchase products immediately and pay in installments over time. 

Browse our store or contact Shop Home Med to help you choose the right bed parts for your needs!

____________________________________________________________________________

Frequently Asked Questions

How can I tell which Invacare bed component I require?

Find the model number (e.g., CS3, CS5) and serial number of the bed, then look for any printed part number on the component, as suppliers will request these. Measure (for frames, panels, sliders) and check voltage and connector types (for electrical components). Only use original parts as they fit seamlessly, meet all warranty requirements, and are the safest to use. 

Are Invacare bed parts expensive to replace?

Prices vary from inexpensive to very costly, depending on the component. Small pieces (casters, rail sliders) are relatively cheap. Motorized actuators, hand control pendants, or new frames or panels are more expensive. Remember to add labor costs if you need a technician.

Do I need to hire a professional, or can I change the components of the bed myself?

For simple parts, such as rail sliders, bed ends, and casters, you can fit them yourself with standard tools. For electrical items, actuators, or any component that affects safety or structural stability (e.g., side rails, frame support), it's safer and often required that a professional or qualified mechanic perform the repair.

How long are spare parts available for Invacare beds after purchase/discontinuation?

Invacare typically supports spare parts for several years after discontinuing a model, but the duration is not always specified. It might be down to distributor stock. Parts may become harder to find for older versions of discontinued ones. It is a good idea to contact approved dealers or healthcare providers.

What safety standards do Invacare hospital bed accessories have to meet?

Replacement parts must comply with relevant U.S. regulations and safety standards. For instance, side rails must meet the FDA-recognized IEC 60601-2-52 standard. Electrical components must adhere to the appropriate wire and insulation standards, and load-bearing parts, such as actuators and frames, should support the specified weight capacities. Non-original or improperly rated parts can compromise safety and performance.